SeaStone Meteorite effect

SeaStone Meteorite is an easily processable product. The Meteorite is available in 3 packs of 5, 10 and 20 kg. The surfaces that you can process with it are approximately 5, 10 and 20 m2 as a double-layer system. The finish is done with the SeaStone metallic Varnish. The SeaStone Meteorite effect is offered as a complete package. Give your wall a fantastic look with this unique product from SeaStone Concrete.

Processing

Step 1.

Apply the SeaStone adhesive primer with a brush or roller and allow the adhesive primer to dry for 2-3 hours.

Step 2.

Apply the SeaStone Meteorite in two coats. Let the first coat dry thoroughly. Apply the second coat slightly thicker.

Step 3.

The stripe pattern can be applied with a brush sponge. Do this immediately after applying the 2nd layer and let it dry completely.

Step 4.

Apply the SeaStone clear varnish with a brush/block brush and let it dry completely.

Step 5.

Apply the SeaStone metallic varnish evenly with a brush to properly fill the relief. If necessary, polish with a dry block brush.

Step 6.

If the metallic varnish is still wet, you can polish it with a brush sponge or a block brush for an even distribution.

What do you need for the SeaStone Meteorite

Below you can find the products you need for the Meteorite Effect. SeaStone Meteorite comes as a complete package.

SeaStone Meteorite 5 kg/5m2/two layers


SeaStone Varnish Brons/500ml/7m2


SeaStone Sealer/500ml/7m2

SeaStone Primer/500ml/7m2


SeaStone Decorative Sponge


Share by: